Note: In order to use 802.1x Auto login, Windows must be managing your wireless connections.

1) From the desktop, click “Start”, then highlight “Settings”, “Network Connections”.

2) Then right-click on your active LAN connection and select “Properties”

 

3) In the LAN connection properties screen select the “Authentication Tab”

4) Under the “Authentication Tab” verify that “Enable IEEE 802.1x authentication     for this network” is checked.

 

5) Next select “Protected EAP (PEAP)” from the “EAP type” drop-down menu and click “Properties”

6) Uncheck the box “Validate server certificate”, Check the box “Enable fast reconnect” and verify “Secured Password (EAP-MSCHAP v2)” is selected in the drop down box.

 

7) Next click the configure button and uncheck the box “Automatically use my windows logon name and password”

 

 

8) You can now click OK three times to exit back the desktop.

9) Next you can connect your Ethernet cable to the wall jack, you will see the following appear in 30-60 seconds.

 

10) Click on the balloon

11) Enter your username and password, the login domain should be left blank.

12) Click OK

13) You should now be authenticated and able to use your internet applications.